Self Storage Design

Moving furniture, boxes, and other items significant to moving is a tedious and often difficult task that may be easily rectified by using a few simple techniques. The first technique is to make a plan and plan ahead. If there is no plan, then it is planned to fail, a wise person once said.  Call around before needing a place to store, boxes, and moving trucks. In addition, it is essential to reserve, reserve, reserve. Then, verify that everything was reserved before the moving date. This way the move is solidified, and there should minute, if not any problems on the moving date.  If renting a self storage building is in the plan, make sure it is easily accessible for the furniture and large items that will be stored. Also, if a truck will be rented clarify that is able to fit into the self storage building , or can be parked close to the building.

In many self storage buildings it is very inconvenient to walk up stairs and use elevators to arrange bulky items into a unit. It is also inconvenient to maneuver a large truck through many properties, because the aisles and driveways are very narrow. This prevents people from accessing the unit if there is a large truck in the way. However, there are numerous designs that can create a more efficient storing building.

One idea for contractors is to erect a building that would be easily accessible for large trucks. Drive up access units are important for many customers, but to find a building that one could drive into while enclosed inside a building is rare. Customers enjoy the benefit of unloading under a roof that protects them from the elements. It also has the benefits of being climate controlled, and controlled by the customer inside the units. Creating a U- shaped self storage building is an excellent idea for those interested in a new innovative building. This building is U-shaped, and is square so that the units obtain the ultimate square footage. There is a roof over the entire building that is eleven feet or more in height. The units are taller and depending on how large the facility is, more than three large trucks may be backed into it at one time. There should be two doors on the unit. One roll up door inhabits the inside of the U-shaped building and another outside. A few cons of this form of building are that vehicles cannot be parked inside for a prolonged period to time to allow for other vehicles to unload and load. This building takes up a lot of space, so a large piece of land should be purchased prior to building to allow for numerous buildings throughout the property.

Another idea that seems to be the main design for an easy accessible self storage building is the row design. There are drive-up access units in row that one can drive up to.  This design although the most prevalent may not be the most economic. The main problem is that the majority of these cannot be climate controlled because it is not sealed similar to a garage door and does not have a roof to unload out of the elements. An alternative to this is to provide an overhead that extends two feet from the roof to create a barrier from the elements. The ceiling height on the roof will need to be at least eleven feet high and the door can be air-tight, so climate control is possible. All of these ideas for a self storage building although beneficial to the customer is costly, so the price may increase slightly, but it should be worth it to those who care.

RV Storage in Columbia

Tweet This Post 

Disclamer: This entry is intended to promote our partner StorageMart and some or all participants received compensation.

View admin's Profile      Subscribe via RSS